Mitsubishi MOTORS Outlander Sport 2019, Owner'S Manual

Page: 39 / 361

Seat belts
4-16 Seat and restraint systems
4
If you then repeatedly stop and start your
vehicle with the seat belt unfastened, the
warning light/display and tone will remind
you to fasten your seat belt every time the
vehicle starts moving. You will also be
reminded to fasten your seat belt in this way
when you remove your seat belt while driv-
ing. The warning light and the tone go off
when the seat belt is fastened.
N00418301289
The front passenger seat belt warning light is
located in the instrument panel.
When the ignition switch is turned to the
“ON” position or the operation mode is put in
ON, this indicator normally comes on and
goes off a few seconds later.
The light comes on when a person sits on the
front passenger seat but does not fasten the
seat belt. It goes off when the seat belt is sub-
sequently fastened.
N00406300344
To move the anchor (A), press the lock knob
(B) and slide the anchor to the desired posi-
tion.
WARNING
 In order to reduce the risk of serious
injury or death in an accident, always fas-
ten your own seat belt. Do not allow any-
one to ride in your vehicle unless he or she
is also seated and fastening a seat belt.
Children should additionally be restrained
in a secure child restraint system.
NOTE
 At the same time, “FASTEN SEAT BELT”
will be displayed on the information screen
in the multi-information display.
Front passenger seat belt warn-
ing light
WARNING
 Do not install any accessory or sticker that
makes the light difficult to see.
Adjustable seat belt shoulder
anchor (front seats)
WARNING
 Always adjust the shoulder belt anchor so
that the shoulder belt is positioned across
the center of your shoulder without touch-
ing your neck. The shoulder belt should
not be able to fall off your shoulder. Fail-
ure to follow this instruction can adversely
affect seat belt performance and increase
the risk of serious injury or death in the
event of an accident.
 Adjust the shoulder belt anchor only when
the vehicle is not in motion.
 Make sure the anchor is securely locked in
position after adjusting it.
Anchor down Anchor up
BK0265500US.book 16 ページ ２０１８年５月８日 火曜日 午後８時７分