Mitsubishi MOTORS Outlander Sport 2019 Owner'S Manual Download Page 335

Page: 335 / 361

Replacement of light bulbs

9-38

Vehicle care and maintenance

4. To install the bulb, perform the removal

steps in reverse.

N00929101077

1. Open the liftgate.

2. Insert a screwdriver into the notch of the

cover and pry gently to remove the cover.

3. Turn the socket counterclockwise to

remove it.

4. Pull the bulb out of the socket.

5. To install the bulb, perform the removal

steps in reverse.

NOTE



When mounting the light unit, align the
groove (D) on the light unit with the clip on
the body and the pin (E) on the unit with the
hole in the body.

Back-up lights

NOTE



Wrap a cloth around the tip of the screw-
driver to keep from scratching the cover.

NOTE



When installing the lid, align the tab on the
lid with the hole on the vehicle side.

BK0265500US.book 38 ページ２０１８年５月８日　火曜日　午後８時７分

Summary of Contents for Outlander Sport 2019









































































































































































































































































































































































Search results

Summary of Contents for Outlander Sport 2019

Reviews:

Related manuals for Outlander Sport 2019

Brands by name

Popular brands

Mitsubishi MOTORS Outlander Sport 2019, Owner'S Manual

Search results

Summary of Contents for Outlander Sport 2019

Reviews:

Related manuals for Outlander Sport 2019

Brands by name

Popular brands