Mitsubishi MOTORS Outlander Sport 2019, Owner'S Manual

Page: 215 / 361

Combination headlights and dimmer switch
5-150 Features and controls
5
go back to normal when you let go. While the
high beam is on, you will see a blue light on
the instrument panel.
N00591300086
The Automatic High Beam (AHB) turns the
high beam light on or off automatically
according to surrounding light conditions.
The sensor (A) detects lights, such as the
lights of an oncoming vehicle, a vehicle
ahead or street lights.
For details about handling the sensor, refer to
“Handling of the sensor” on page 5-84.
N00593600083
1. Rotate the light switch to “ ” position
or “AUTO” position when the engine is
running.
2. Press the AHB switch.
The AHB is activated and the indicator is
illuminated.
If the AHB switch is pressed again, the
AHB will be deactivated and AHB indica-
tor will go off.
NOTE
 You can flash the high beams by pulling the
lever toward you, even if the light switch is
off.
 If you turn the lights off with the head lights
set to high-beam illumination, the headlights
are automatically returned to their low-beam
setting when the light switch is next turned
to the “
” position.
Automatic High Beam (AHB)
(if
so equipped)
WARNING
 Do not rely solely on the AHB. Always
observe surrounding traffic and light con-
ditions. If necessary, manually turn the
high beams on or off.
Refer to “Dimmer (high/low beam
change)” on page 5-149.
How to use the AHB
BK0265500US.book 150 ページ ２０１８年５月８日 火曜日 午後８時７分