Mitsubishi MOTORS Outlander Sport 2019, Owner'S Manual

Page: 268 / 361

Automatic air conditioning-Type1 (if so equipped)
Comfort controls 7-9
7
N00731501366
N00711801741
N00736900153
When the ignition switch or the operation
mode is in ON, select the blower speed by
turning the blower speed selection dial.
Turning the dial clockwise will increase the
blower speed; turning the dial counterclock-
wise will decrease it. When the dial is set to
the “OFF” position, all fan-driven airflow
will stop.
NOTE
 While the mode selection dial is set to the
“
” position, the air conditioning com-
pressor will run automatically. The outside
air position will also be automatically
selected.
 While the “ ” position is selected, you
cannot turn the air conditioning off or select
the recirculation position.
This prevents the windows from fogging up.
 To defog quickly, direct the air flow from the
side vents toward the door windows.
 When defrosting, do not set the temperature
control dial near the maximum cool position.
This would blow cool air on the window
glass and fog it up.
Automatic air conditioning-
Type1
(if so equipped)
CAUTION
 The engine speed may increase when the air
conditioning is operating.
With an increased engine speed, a continu-
ously variable transmission (CVT) vehicle
will creep to a greater degree than with a
lower engine speed. Fully depress the brake
pedal to prevent the vehicle from creeping.
Control panel
A- Temperature control dial
B- Air selection switch
C- Blower speed selection dial
D- Air conditioning switch
E- Mode selection dial
F- Electric rear window defogger switch

P.5-162
NOTE
 There is an interior air temperature sensor
(G) in the illustrated position.
Never place anything over the sensor, since
doing so will prevent it from functioning
properly.
Blower speed selection dial
BK0265500US.book 9 ページ ２０１８年５月８日 火曜日 午後８時７分