Mitsubishi MOTORS Outlander Sport 2019, Owner'S Manual

Page: 163 / 361

Tire pressure monitoring system
5-98 Features and controls
5
If the LDW is deactivated due to a malfunc-
tion in the system, the either alarm shown
below is displayed. Contact your authorized
Mitsubishi Motors dealer for inspection of the
system.
N00530201625
The tire pressure monitoring system uses tire
inflation pressure sensors (A) on the wheels
to monitor the tire inflation pressures. The
system only indicates when a tire is signifi-
cantly under-inflated.
LDW deactivation due to fault
NOTE
 If the sensor or its surrounding area becomes
extremely hot (after prolonged exposure to
direct sunlight, for example), the “LDW
SERVICE REQUIRED” message may
appear.
If the message remains even after the tem-
perature of the sensor or its surrounding area
has been in range, please contact an autho-
rized Mitsubishi Motors dealer.
Tire pressure monitoring
system
WARNING
 The compact spare wheel does not have a
tire inflation pressure sensor.
When the spare tire is used, the tire pres-
sure monitoring system will not work
properly.
See an authorized Mitsubishi Motors
dealer as soon as possible to replace or
repair the original tire.
NOTE
 The tire pressure monitoring system is not a
substitute for regularly checking tire infla-
tion pressures.
Be sure to check the tire inflation pressures
as described in “Tires” on page 9-14.

The tire inflation pressure sensor (B) is
installed in the illustrated location.
• On vehicles with Type 1 sensor which has
the metallic air valve (C), replace grommet
and washer (D) with a new one when the
tire is replaced.
• On vehicles with Type 2 sensor which has
the rubber air valve (E), replace rubber air
valve (E) with a new one when the tire is
replaced.
BK0265500US.book 98 ページ ２０１８年５月８日 火曜日 午後８時７分