background image

Filling the fuel tank

General information

3-3

3

Use of gasolines blended with MMT may
adversely affect performance, and cause the
malfunction indicator on your instrument
panel to come on. If this happens, contact an
authorized Mitsubishi Motors dealer or a
repair facility of your choice for assistance.

Your vehicle may have been designed to sat-
isfy California’s low-emission regulations
based on clean-burning low-sulfur gasoline.
Gasoline sold in parts of the country other
than California is allowed to have a higher
sulfur content. Using such gasoline could
adversely affect the vehicle’s catalytic con-
verter and cause the engine malfunction indi-
cator (“SERVICE ENGINE SOON” or
“Check engine light”) to come on. Illumina-
tion of this indicator while you are using
high-sulfur gasoline does not necessarily
mean the vehicle’s emission-control system is
malfunctioning. Your authorized Mitsubishi
Motors dealer may suggest you try using a
different, lower-sulfur brand of unleaded gas-
oline to determine whether the problem is
fuel-related.

N00301101978

Sulfur in gasoline 

NOTE

Poor-quality gasoline can cause problems
such as poor starting, stalling during idling,
abnormal engine noise, and poor accelera-
tion. If you experience any of these prob-
lems, try using a different brand of gasoline.
If the engine malfunction indicator (“SER-
VICE ENGINE SOON” or “Check engine
light”) flashes, have the vehicle inspected as
soon as possible by the nearest authorized
Mitsubishi Motors dealer or a repair facility
of your choice.

Repeatedly driving short distances at low
speeds can cause deposits to form in the fuel
system and engine, resulting in poor starting
and poor acceleration. If these problems
occur, you are advised to add a detergent
additive to the gasoline when you refuel the
vehicle. The additive will remove the depos-
its, thereby returning the engine to a normal
condition. Be sure to use a Mitsubishi
Motors Genuine cleaning additive. Using an
unsuitable additive could make the engine
malfunction. For details, please contact the
nearest authorized Mitsubishi Motors dealer.

Filling the fuel tank 

WARNING

Gasoline is highly flammable and explo-
sive. You could be burned, seriously
injured or killed when handling it. When
refueling your vehicle, always turn the
engine off and keep away from flames,
sparks, and smoking materials. Always
handle fuel in well-ventilated outdoor
areas.

Before removing the fuel tank filler cap,
be sure to get rid of your body’s static
electricity by touching a metal part of the
car or fuel pump. Any static electricity on
your body could create a spark that
ignites fuel vapor.

Perform the whole refueling process
(opening the fuel tank filler door, remov-
ing the fuel cap, etc.) by yourself; do not
let any other person near the fuel tank
filler. If you allowed a person to help you
and that person was carrying static elec-
tricity, fuel vapor could be ignited.

Do not move away from the fuel tank filler
until refueling is finished. If you moved
away and did something else (for example,
sitting on a seat) part-way through the
refueling process, you could pick up a
fresh charge of static electricity.

Be careful not to inhale fuel vapor. Fuel
contains toxic substances.

BK0265500US.book  3 ページ  2018年5月8日 火曜日 午後8時7分

Summary of Contents for Outlander Sport 2019










































































































































































































































































































































































Reviews: