Mitsubishi MOTORS Outlander Sport 2019, Owner'S Manual

Page: 149 / 361

Forward Collision Mitigation system (FCM) (if so equipped)
5-84 Features and controls
5
If the FCM detects a malfunction in the sys-
tem, either of the following messages will
appear on the information screen of the multi-
information display, the indicator will
come on in the instrument cluster, and the
FCM will automatically be turned off.
If the message remains even after the ignition
switch is turned to the “OFF” position and
then turned back to “ON” position or the
operation mode is put in OFF, and then turned
back to “ON”, please contact your authorized
Mitsubishi Motors dealer.
N00593400108
The sensor (A) is located inside the wind-
shield as shown in the illustration.
The sensor is shared in the following sys-
tems:
 Forward Collision Mitigation system
(FCM) (if so equipped)

Lane Departure Warning (LDW) (if so
equipped)

Automatic High Beam (AHB) (if so
equipped)
FCM deactivation due to fault
NOTE
 If the sensor or its surrounding area becomes
extremely hot (after prolonged exposure to
direct sunlight, for example), the “FCM
SERVICE REQUIRED” message may
appear.
After the temperature of the sensor or its sur-
rounding area has been in range, if the mes-
sage remains even after restarting the engine,
please contact an authorized Mitsubishi
Motors dealer.
Handling of the sensor
CAUTION
 To maintain proper performance of the FCM,
LDW and AHB;
BK0265500US.book 84 ページ ２０１８年５月８日 火曜日 午後８時７分