Mitsubishi MOTORS Outlander Sport 2019, Owner'S Manual

Page: 157 / 361

Rear Cross Traffic Alert (RCTA) (if so equipped)
5-92 Features and controls
5
The detection area is shown as illustrated.
1. Press the BSW switch while the ignition
switch is turned to the “ON” position or
the operation mode is put in ON.
(Refer to “Blind Spot Warning (BSW): To
operate” on page 5-87.)
2. When the selector lever is moved to the
“R” (REVERSE) position, the RCTA will
operate.
Detection areas
CAUTION
 In certain situations, the RCTA may not
detect a vehicle in the detection areas. Some
of these situations include;
• When the reversing speed of your vehicle is
approximately 11 mph (18 km/h) or higher.
• When the speed of an approaching vehicle
is approximately 4 mph (7 km/h) or less.
• If the sensor detection area is blocked by a
nearby object, such as wall or parked vehi-
cle.
• When a vehicle is approaching from
straight behind your vehicle.
• When your vehicle is exiting from an
angled parking spot.
• Immediately after the RCTA has been
turned on.
• Immediately after the ignition switch is
turned to the “ON” position or the opera-
tion mode is put in ON.
• When the bumper surface around the sensor
is covered with dirt, snow and ice, etc.
• When the sensor becomes extremely hot or
cold, such as after the vehicle has been
parked for a prolonged time under the blaz-
ing sun or in cold weather.
CAUTION
 If the bumper has experienced an impact, the
sensor may have been damaged and the
RCTA may not function properly. Have the
vehicle inspected at an authorized Mitsubishi
Motors dealer.
To operate
CAUTION
 Within approximately 7 seconds after the
ignition switch is turned to the “ON” posi-
tion or the operation mode is put in ON, a
warning message will not appear on the
information screen of the multi-information
display even if the system detects a vehicle
approaching your vehicle.
CAUTION
BK0265500US.book 92 ページ ２０１８年５月８日 火曜日 午後８時７分