Mitsubishi MOTORS Outlander Sport 2019, Owner'S Manual

Page: 292 / 361

How to change a tire
For emergencies 8-11
8
N00850000162
Reverse the removing procedure when stor-
ing the flat tire or spare tire, jack, bar and
wheel nut wrench.
Refer to “To remove the spare tire” on page
8-7 and “Jack and tools” on page 8-5.
N00849400195
Wrap the tip of the bar with a cloth, insert it
deeply into the notch provided in the wheel
cover, and pry the cover away from the
wheel.
Using the same procedure at the other wheel
cover notches, work the wheel cover away
from the wheel to remove it completely.
1. Align the tire air valve (C) and the wheel
cover notch (D).
 If the steering wheel vibrates when driving
after changing the tire, have the tire checked
for balance at an authorized Mitsubishi
Motors dealer or a repair facility of your
choice.

Do not mix one type of tire with another or
use a different size from the one listed. This
would cause early wear and poor handling.
To store the flat tire or spare
tire, jack, bar and wheel nut
wrench
CAUTION Wheel cover
(if so equipped)
To remove
NOTE
 The wheel cover is made of plastic. Be care-
ful when prying it off.
CAUTION
 Trying to remove the wheel cover with only
your bare hands can seriously injure your
fingers.
To install
CAUTION
 Before installing the wheel cover to the
wheel, make sure that the tabs (A) on the
back of the wheel cover correctly engage the
ring (B) to prevent the wheel cover from
coming off. Do not install a wheel cover that
has broken tabs.
BK0265500US.book 11 ページ ２０１８年５月８日 火曜日 午後８時７分