Mitsubishi MOTORS Outlander Sport 2019, Owner'S Manual

Page: 334 / 361

Replacement of light bulbs
Vehicle care and maintenance 9-37
9
N00900301214
N00943701530
1. Remove the screws (A) that hold the light
unit and remove the light unit.
2. Turn the socket and bulb assembly coun-
terclockwise to remove it.
3. Pull the bulb out of the socket.
 Never hold the halogen light bulb with a bare
hand, dirty glove, etc. The oil from your
hand could cause the bulb to break the next
time the fog lights are used.
If the glass surface is dirty, clean it with
alcohol and let it dry completely before
installing the bulb.
NOTE
 When refitting the clip, first insert part (H)
of the clip into the hole and then press part
(I) into it.
CAUTION Daytime running lights (if so
equipped)/parking lights (Type
2) (if so equipped)
NOTE

The daytime running light/parking lights
(Type 2) uses an LED instead of the bulb.
Check with an authorized Mitsubishi Motors
dealer or a repair facility of your choice
when the light needs to be repaired or
replaced.
Rear combination lights
B- Rear side-marker light, and tail and stop
light (LED)
- cannot be replaced
C- Rear turn signal light
NOTE
 The rear side-marker light, and the tail and
stop light uses an LED instead of the bulb.
Check with an authorized Mitsubishi Motors
dealer or a repair facility of your choice
when the light needs to be repaired or
replaced.
BK0265500US.book 37 ページ ２０１８年５月８日 火曜日 午後８時７分