Mitsubishi MOTORS Outlander Sport 2019, Owner'S Manual

Page: 176 / 361

Multi-information display
Features and controls 5-111
5
When the time for periodic inspection arrives,
the warning display is displayed for a few
seconds after the screen that is initially dis-
played when the ignition switch is turned
“ON” or the operation mode is changed to
ON.
Refer to “Service reminder” on page 5-116.
N00555900020
Shows the 4WD drive status.
Refer to “Drive mode-selector” on page 5-59.
N00555200182
This is displayed when you press the multi-
information meter switch and switch the
warning display screen.
This mark is also displayed if there is another
warning other than the one displayed.
When the cause of the warning display is
eliminated, the warning goes out automat-
ically.
N00556201290
Each time you lightly press the multi-infor-
mation meter switch, the display screen
switches in the following order.
NOTE
 The system check screen display varies
depending on your equipment.
Service reminder
Drive mode indicator display
screen
(if so equipped)
Warning display screen
(With ignition switch or opera-
tion mode in ON)
NOTE
 When the warning is displayed, the warn-
ing display screen can be redisplayed on the
information screen.
Refer to “Information screen (With ignition
switch or operation mode in OFF)” on page
5-108.
Refer to “Information screen (With ignition
switch or operation mode in ON)” on page
5-111.
Information screen (With igni-
tion switch or operation mode
in ON)
1- Trip odometer
2- Trip odometer
3- Service reminder
4- Driving range display, momentary fuel
consumption display
When there is no
warning display
When there is a
warning display
BK0265500US.book 111 ページ ２０１８年５月８日 火曜日 午後８時７分