Mitsubishi MOTORS Outlander Sport 2019, Owner'S Manual

Page: 38 / 361

Seat belts
Seat and restraint systems 4-15
4
1. Insert the latch plate (E) of the center seat
belt into the slit (G) on the detachable
anchor (C) and release the center seat belt
from the detachable anchor.
2. Pass the seat belt through the seat belt
guide (A) and retract it completely toward
the rear trim.
3. After the seat belt is retracted completely,
insert the latch plate (E) into the upper slit
(H) and the small latch plate (B) into the
lower slit (I).
N00418401437
Warning light
Warning display
A tone and warning light are used to remind
the driver to fasten the seat belt.
If the ignition switch is turned to the “ON”
position or the operation mode is put in ON
without the driver’s seat belt being fastened, a
warning light will come on and a tone will
sound for approximately 6 seconds to remind
you to fasten your seat belt.
If you then drive with the seat belt unfastened
for longer than a minute from when the igni-
tion switch or the engine switch is operated,
the warning light will come on and blink
repeatedly and the tone will sound intermit-
tently.
The warning light and the tone will stop after
approximately 90 seconds.
To detach
Driver’s seat belt
reminder/warning light and
display
BK0265500US.book 15 ページ ２０１８年５月８日 火曜日 午後８時７分