Mitsubishi MOTORS Outlander Sport 2019, Owner'S Manual

Page: 309 / 361

Battery
9-12 Vehicle care and maintenance
9
1. Remove the clips (A), and then remove
the upper cover (B).
2. Remove the clips (C), and then remove
the air duct (D).
1. Install the air duct (A), and then tighten
the clips (B).
2. Turn the upper cover over. Squeeze the
head of the moulding clip (C) with pliers
and remove the moulding.
3. Install the upper cover, and then attach the
moulding (D).
4. Install the clips (E).
WARNING
 Turn the ignition switch to the “LOCK”
position or put the operation mode in
OFF.
Make sure that your clothes cannot be
caught by the fan or drive belt. Personal
injury could result.
To remove
To install
NOTE
 Attach the moulding with the wide part
toward the front of the vehicle.
BK0265500US.book 12 ページ ２０１８年５月８日 火曜日 午後８時７分