Mitsubishi MOTORS Outlander Sport 2019, Owner'S Manual

Page: 175 / 361

Multi-information display
5-110 Features and controls
5
When the warning is displayed, if you
lightly press the multi-information meter
switch a few times, the warning display
screen you switched from is redisplayed.
Refer to “Information screen (With ignition
switch or operation mode in OFF)” on page
5-108.
N00559701179
If any of the doors or the liftgate is not com-
pletely closed, this displays the open door or
liftgate.
N00555801286
When the ignition switch is turned to the
“ON” position or the operation mode changed
to ON, the display screen switches in the fol-
lowing order.
When the ignition switch is turned to the
“ON” position or the operation mode is
changed to ON, the system check screen is
displayed for about 4 seconds. If there in no
fault, the information screen is displayed.
If there is a fault, the screen changes to warn-
ing display.
Refer to “Warning display list (With ignition
switch or operation mode in ON)” on page
5-129.
NOTE

Warning display screens with a “ ” or
“ ” mark displayed in the upper right of the
screen can be switched. If you want to switch
the display, press the multi-information
meter switch as follows.
“ ”: Press lightly.
“ ”: Press for about 2 seconds or more.
Redisplay of a warning display screen
Door ajar warning display
screen (With ignition switch or
operation mode in OFF)
1- Doors and liftgate are closed
2- Doors or liftgate is open
Information screen (With the
ignition switch is turned from
the “OFF” position to the “ON”
position or the operation mode
is changed from OFF to ON)
1- Screen when the ignition switch or oper-
ation mode is OFF)
2- System check screen
3- Screen when the ignition switch or oper-
ation mode is ON)
System check screen
BK0265500US.book 110 ページ ２０１８年５月８日 火曜日 午後８時７分