Mitsubishi MOTORS Outlander Sport 2019, Owner'S Manual

Page: 46 / 361

Child restraint systems
Seat and restraint systems 4-23
4
5. Latch the tether strap hook (E) of the child
restraint system to the tether anchor bar
(F) and tighten the tether strap so it is
securely fastened.
6. Push and pull the child restraint system in
all directions to be sure it is firmly
secured.
N00407301579
With the exception of the driver’s seat, the
seat belt in all other seating positions can be
converted from normal Emergency Locking
Retractor (ELR) mode to Automatic Locking
Retractor (ALR) mode. This means that when
you pull the seat belt fully out of the retractor,
the retractor will switch to its ALR child
restraint installation function. Always use the
ALR child restraint installation function
when you install a child restraint system
using the seat belt.
Children 12 years old and under should
always be restrained in the rear seat whenever
possible, although the front passenger seat
belt can also be converted to ALR mode.
1. Place the child restraint system on the seat
where you wish to install it.
To help assure proper fitting of the child
restraint system, always remove the head
restraint.
WARNING
 Child restraint system tether anchors are
designed only to withstand loads from cor-
rectly fitted child restraint systems. Under
no circumstances are they to be used for
adult seat belts, or harnesses, or for
attaching other items or equipment to the
vehicle.
Installing a child restraint sys-
tem using the seat belt (with
emergency/automatic locking
mechanism) WARNING
 When you install a child restraint system
using the seat belt, always make sure the
retractor has been switched to the ALR
child restraint installation function. The
ALR function will keep the child restraint
system tightly secured to the seat.
Failure to convert the retractor to the
ALR function may allow the child
restraint system to move forward during
sudden braking or an accident, resulting
in serious injury or death to the child or
other occupants.

When you install a child restraint system
using the 3-point type seat belt with 2
buckles in the rear center seating position,
always make sure both latch plates are
secured. Do not use the seat belt with only
one of the latch plates attached. This could
result in a serious injury or death in the
event of an accident or sudden stop.
Installation
BK0265500US.book 23 ページ ２０１８年５月８日 火曜日 午後８時７分