Mitsubishi MOTORS Outlander Sport 2019, Owner'S Manual

Page: 178 / 361

Multi-information display
Features and controls 5-113
5
Be conscious of maintaining the momentary
fuel consumption above the average fuel con-
sumption, it can help you drive with the better
fuel consumption.
This displays the average fuel consumption
from the last reset to the present.
There are 2 types of mode settings as follows.
For details on how to change the average fuel
consumption display setting, refer to “Chang-
ing the function settings (With ignition switch
or operation mode in ON)” on page 5-118.
The “
” mark in the momentary fuel gauge
shows the average fuel consumption.
 When the average fuel consumption is
being displayed, if you hold down the
multi-information meter switch, these cal-
culations will be reset to zero.
 When the following operation is per-
formed, the mode setting changes auto-
matically from manual to auto.
[Except for vehicles equipped with the
F.A.S.T.-key]
Turn the ignition switch to the “ON” posi-
tion from the “ACC” or “OFF” position.
[For vehicles equipped with the F.A.S.T.-
key]
Change the operation mode to ON from
ACC or OFF.
 When the average fuel consumption is
being displayed, if you hold down the
multi-information meter switch, these cal-
culations will be reset to zero.
 When the engine switch or the operation
mode is in the following conditions, the
average fuel consumption display will
automatically reset.
[Except for vehicles equipped with the
F.A.S.T.-key]
The ignition switch has been set to the
“ACC” or “OFF” position for about
4 hours or more.
[For vehicles equipped with the F.A.S.T.-
key]
The operation mode has been set to ACC
or OFF for about 4 hours or more.
NOTE
 When the momentary fuel consumption can-
not be measured, a bar graph is not shown.
 The display setting can be changed to the
preferred units {mpg (US), mpg (UK),
L/100km or km/L}.
Refer to “Changing the function settings
(With ignition switch or operation mode in
ON)” on page 5-118.
 It is possible to cancel the green bar graph.
Refer to “Changing the function settings
(With ignition switch or operation mode in
ON)” on page 5-118.
Average fuel consumption display
Manual reset mode
Auto reset mode
NOTE
 The average speed display and the average
fuel consumption display can be reset sepa-
rately in both auto reset mode and manual
reset mode.
 “---” is displayed when the average fuel con-
sumption cannot be measured.
 The initial (default) setting is “Auto reset
mode”.
 Average fuel consumption may vary depend
on the driving conditions (road conditions,
how you drive, etc.) The actual fuel con-
sumption may differ from the fuel consump-
tion displayed, so treat the fuel consumption
displayed as just a rough guideline.
 Disconnecting the battery cable will erase
from memory the manual reset mode or auto
reset mode setting for the average fuel con-
sumption display.
 The display setting can be changed to the
preferred units {mpg (US), mpg (UK),
L/100km or km/L}.
Refer to “Changing the function settings
(With ignition switch or operation mode in
ON)” on page 5-118.
BK0265500US.book 113 ページ ２０１８年５月８日 火曜日 午後８時７分