Mitsubishi MOTORS Outlander Sport 2019, Owner'S Manual

Page: 228 / 361

Horn switch
Features and controls 5-163
5
N00523801209
To honk the horn, press around the “ ” mark
on the steering wheel.
N00563701213
The Link System takes overall control of the
devices connected via the USB input terminal
allowing the connected devices to be operated
by using the switches in the vehicle. Refer to
“USB input terminal” on page 5-163.
N00566701227
You can connect your USB memory device or
iPod
* to play music files stored in the USB
memory device or iPod.
* : “iPod” is a registered trademark of Apple
Inc. in the United States and other countries.
N00566801228
1. Park your vehicle in a safe place and turn
the ignition switch to the “OFF” position
or put the operation mode in OFF.
2. Connect a commercially available USB
connector cable (B) to the USB memory
device (A).
3. Connect the USB connector cable (B) to
the USB input terminal (C).
 Use the rear window defogger only after the
engine has started and is running. Be sure to
turn the defogger switch off immediately
after the window is clear to save on battery
power.

Do not place stickers, tape, or other items
that are attached with adhesive over the grid
wires on the rear window.
 When cleaning the inside rear window, use a
soft cloth and wipe lightly over the grid
wires.
NOTE
 As your vehicle is equipped with heated mir-
rors, mist can also be removed from the out-
side rearview mirrors when the rear window
defogger switch is pressed. (Refer to “Door
mirror heater” on page 5-46.)
Horn switch
CAUTION
Link System
USB input terminal
How to connect a USB memory
device
BK0265500US.book 163 ページ ２０１８年５月８日 火曜日 午後８時７分