Mitsubishi MOTORS Outlander Sport 2019, Owner'S Manual

Page: 139 / 361

Cruise control
5-74 Features and controls
5
N00518401409
1. With the ignition switch in “ON” position
or the operation mode is in ON, press the
CRUISE CONTROL ON/OFF switch (A)
to turn on the cruise control. The
“CRUISE” indicator light in the meter
cluster will come on.
2. Accelerate or decelerate to your desired
speed, then push down and release the
SET - switch (B) when the “CRUISE”
indicator light is illuminated. The vehicle
will then maintain the desired speed.
N00518501367
There are 2 ways to increase the set speed.
Push up and hold the RES + switch (C) while
driving at the set speed, and your speed will
then gradually increase.
When you reach your desired speed, release
the switch. Your new cruising speed is now
set.
NOTE
 When operating the cruise control switches,
press the cruise control switches correctly.
The set speed driving may be deactivated
automatically if two or more switches of the
cruise control are pressed at the same time.
To activate
NOTE
 If the cruise control is on when the following
operation is performed, cruise control will be
on automatically the next time you start the
engine. The “CRUISE” indicator light will
also be on.
[Except for vehicles equipped with the
F.A.S.T.-key]
Turn the ignition switch to the “OFF” or
“ACC” position.
[Vehicles equipped with the F.A.S.T.-key]
Put the operation mode in OFF or ACC.

If the battery voltage is insufficient, the
memory data for the cruise control may be
erased.
As a result, the “CRUISE” indicator light
may not come on when you restart the
engine.
If this happens, press the CRUISE CON-
TROL ON/OFF switch once again to turn on
the cruise control.
NOTE
 When you release the SET - switch, the vehi-
cle speed will be set.
To increase the set speed
RES + switch
BK0265500US.book 74 ページ ２０１８年５月８日 火曜日 午後８時７分