Mitsubishi MOTORS Outlander Sport 2019, Owner'S Manual

Page: 37 / 361

Seat belts
4-14 Seat and restraint systems
4
6. To release the belt, press the button on the
buckle and allow the belt to retract.
If the belt does not retract smoothly, pull it
out and check for kinks or twists in the
webbing. Then make sure it remains
untwisted as it retracts.
N00409700017
The rear center seat belt can be detached to
help avoid damage caused by an object in the
luggage compartment while the driver’s side
rear seat back is folded down.
1. Pull the seat belt out slowly and pass it
through the seat belt guide (A).
2. After making sure that the seat belt is not
twisted, insert the small latch plate (B)
into the detachable anchor (C) aligning
the marks (D) on the plate and buckle
until a “click” is heard.
 Be sure the seat belt webbing is not
twisted when worn. Twisted webbing may
adversely affect seat belt performance.
NOTE
 If the seat belt (A) or ring (B) becomes dirty,
the belt may not retract smoothly. If the seat
belt and ring are dirty, clean them with a
mild soap or detergent solution.
Detachable rear center seat belt
WARNING
WARNING
 Never detach the rear center seat belt
except when the driver’s side rear seat
back is folded down. Using the rear center
seat belt with the detachable anchor
unlatched increases the risk of serious
injury or death in an accident. Make sure
the detachable anchor is properly latched
before the center seat belt is used.
To attach
NOTE
 If the seat belt locks up and cannot be pulled
out, pull it once with force and let it retract
all the way.
Then, pull the belt out slowly once again.
BK0265500US.book 14 ページ ２０１８年５月８日 火曜日 午後８時７分