Mitsubishi MOTORS Outlander Sport 2019, Owner'S Manual

Page: 264 / 361

Manual air conditioning (if so equipped)
Comfort controls 7-5
7
N00736700207
To change the amount of air flowing from the
vents, turn the mode selection dial. Refer to
“Changing the mode selection” on page 7-2.
N00736800396
Normally, use the outside air position to keep
the windshield and side windows clear and to
quickly remove fog or frost from the wind-
shield.
To change the air selection, simply press the
air selection switch. A sound will be made
every time you push the switch.
 Outside air {Indicator light (A) OFF}
 Recirculated air {Indicator light (A) ON}
When the air conditioning turns on, the air
selection is controlled automatically.
The air selection indicator light (A) shows the
selected position.
If the outside air is dusty or contaminated in
some way, use the recirculation position.
Switch to the outside air position every now
and then to keep the windows from fogging
up.
NOTE
 While the engine coolant temperature is low,
the temperature of the air from the heater
will be cool/cold until the engine warms up,
even if you have selected warm air with the
dial.
Mode selection dial
Air selection switch
NOTE
 When the air conditioning operates with the
air selection switch in the outside air posi-
tion, the system automatically determines
whether to continue using outside air or to
perform recirculation.
If the outside temperature is high, the system
selects recirculation to achieve rapid cooling
and causes the air selection indicator in the
switch to illuminate. Press the air selection
switch to return to outside air.
CAUTION
 Using recirculated air for a long time may
cause the windows to fog up.
NOTE
 While the mode selection dial is set to the
“
” position, the air conditioning com-
pressor will run automatically. The outside
air position will also be selected automati-
cally.
BK0265500US.book 5 ページ ２０１８年５月８日 火曜日 午後８時７分