Mitsubishi MOTORS Outlander Sport 2019, Owner'S Manual

Page: 286 / 361

Jack and tools
For emergencies 8-5
8
8. If the engine coolant reserve tank needs
coolant, you will probably also need to
add coolant to the radiator. Do not loosen
or remove the radiator cap until the engine
has cooled down.
9. Start the engine, and slowly add coolant,
up to the bottom of the filler neck. Use
plain water if you have to (and replace it
with the right coolant as soon as possible).
10. Replace the radiator cap and tighten it
fully. Check the engine coolant tempera-
ture display on the multi-information dis-
play. You can start driving again when
the bar graph for the engine coolant tem-
perature display returns to the normal
zone.
11. Have the system inspected by your autho-
rized Mitsubishi Motors dealer or a repair
facility of your choice.
N00836601448
The tools and jack are stowed in the luggage
compartment.
Before removing the jack, lift up the luggage
floor board.
WARNING
 Removing the radiator cap could scald
you with escaping hot water or steam.
When checking the radiator level, cover
the cap with a cloth before trying to
remove it. Turn it slowly counterclock-
wise, without pressing down, to the first
notch. The pressure in the system will then
be let out. When the pressure is COM-
PLETELY LET OUT, press down and
keep turning the cap counterclockwise
until it comes off.
Jack and tools
Storage
1- Tools
2- Jack
Tools
1- Bar
2- Wheel nut wrench
Jack
BK0265500US.book 5 ページ ２０１８年５月８日 火曜日 午後８時７分