Mitsubishi MOTORS Outlander Sport 2019, Owner'S Manual

Page: 151 / 361

Blind Spot Warning (BSW) (with Lane Change Assist) (if so equipped)
5-86 Features and controls
5
side where the Blind Spot Warning light is
illuminated, the Blind Spot Warning light will
blink and the system will beep 3 times to alert
the driver.
Depending on the relative speed between
your vehicle and a vehicle in the next lane,
the BSW will detect up to approximately
230 feet (70 m) from your vehicle (Lane
Change Assist).
N00592300083
The BSW uses 2 sensors (A) located inside
the rear bumper.
The detection areas are shown as illustrated.
WARNING
 Before using the BSW, read this entire sec-
tion to fully understand the limitations of
this system. Failure to follow instructions
could result in an accident.
 Never rely solely on the BSW system when
changing lanes. BSW is an aid only. It is
not a substitute for your safe and careful
driving. Always check visually behind and
all around your vehicle for other vehicles.
The performance of the BSW may vary
depending on driving, traffic and/or road
conditions.
Detection areas
WARNING
WARNING
 In certain situations, the BSW may not
detect a vehicle in the detection areas or
the detection may be delayed. Some of
these include;
• When a small motorcycle or a bicycle is
behind your vehicle.
• When a vehicle is traveling alongside of
your vehicle at nearly the same speed for
prolonged periods of time.
BK0265500US.book 86 ページ ２０１８年５月８日 火曜日 午後８時７分