Mitsubishi MOTORS Outlander Sport 2019, Owner'S Manual

Page: 147 / 361

Forward Collision Mitigation system (FCM) (if so equipped)
5-82 Features and controls
5
Every time the operation mode is put in
“ON”, the FCM the ignition switch is turned
to the “ON” position or the operation mode is
put in ON, will automatically be turned on.
To turn off the FCM, press and hold the FCM
ON/OFF switch. The following message
appears on the information screen of the
multi-information display and the indica-
tor will come on in the instrument cluster.
To turn on the FCM again, press the FCM
ON/OFF switch. The indicator on the
instrument cluster will go off, and a current
distance mode for the forward collision warn-
ing will be shown in the information screen
of the multi-information display.
The distance to the vehicle ahead which trig-
gers the forward collision warnings can be
selected from three levels (far, middle or
near).
To change the distance mode, push the FCM
ON/OFF switch. Every time the switch is
pushed, the distance mode will be switched.
The selected distance mode is shown on the
information screen of the multi-information
display.
Distance mode: Far
Distance mode: Middle
Distance mode: Near
N00593300051
If there is a malfunction in the system, a
warning will appear on the information
screen of the multi-information display
depending on the situation.
When the FCM system determines that its
performance has been degraded, the FCM
will become inoperative.
This can occur when:
To turn on/off the FCM To change forward collision warn-
ing distance
NOTE
 Actual distance which triggers the forward
collision warnings will vary depending on
your vehicle speed and the front vehicle
speed. The distance will become longer
when the vehicle speeds are higher.
 The distance which will trigger the FCM
braking function cannot be adjusted.
System problem warning
Windshield is dirty
BK0265500US.book 82 ページ ２０１８年５月８日 火曜日 午後８時７分