Mitsubishi Electric City Multi CMH-WM250V-A, Service Handbook

Page: 369 / 436

[8-13 Parts Replacement Instructions ]
114
- chapter 8 BS_08_E
8 Troub
le
sho
oting Bas
ed on Ob
ser
ved
Sy
mp
toms
(16) To remove the front heat exchanger, unscrew the screws on the front of the right front pillar. (4 screws on a standard
model or 3 screws on a high-efficiency model) (See Figure 14.)
To remove the left rear heat exchanger, unscrew the screws on the left side of the left front pillar and the screws on the
front of the center pillar (7 screws on a standard model or 8 screws on a high-efficiency model. (See Figures 15 and 16.)
To remove the right rear heat exchanger, unscrew the screws on the right side of the right front pillar and the screws on
the front of the center pillar (7 screws on a standard model or 6 screws on a high-efficiency model. (See Figures 16 and
17.)
Front heat exchanger
Unscrew the screws.
Unscrew the screws.
Left front pillar
Right front pillar
Connection of the pillar to
the left rear heat exchanger
(4 screws on a standard
model or 5 screws on a
high-efficiency model)
Removing the left rear heat
exchanger (Figure 15) Removing the right rear heat
exchanger (Figure 17) Removing the right and left rear heat
exchangers (Figure 16)
Removing the front heat exchanger
(Figure 14)
Connection of the pillar to the right
rear heat exchanger (4 screws on
a standard model or 3 screws on a
high-efficiency model)
Connection of the pillar to the front heat exchanger
(4 screws on a standard model or 3 screws on a
high-efficiency model)
Unscrew
the
screws.
Unscrew
the screws.
Center pillar
(3 screws)
Left rear
heat
exchanger
Right rear
heat
exchanger
0000004986.BOOK 114 ページ ２０１９年５月９日 木曜日 午後６時２２分