Mitsubishi Electric City Multi CMH-WM250V-A, Service Handbook

Page: 134 / 436

[5-2 Outdoor Unit Control ]
BS_05_E chapter 5 -
15
5
Cont
rol
5-2-6 Defrost Operation Control
(1) Starting the defrost operation
 The defrost cycle will start when all of the three conditions (outside temperature, cumulative compressor operation time, and
pipe temperature) under <Condition 1>, <Condition 2>, or <Condition 3> are met.
1) Evaporating temperature (Te)
 The defrost cycle will not start if other outdoor units are in the defrost cycle or until a minimum of 10 minutes have passed
since the completion of the last defrost cycle.
 If 10 minutes have passed since compressor startup or since the completion of a defrost cycle, a forced defrost cycle can be
started by setting DIP SW4(913) to ON.
 Even if the defrost-prohibit timer is set to 90 minutes, the actual defrost-prohibit time for the next defrost cycle is 50 minutes
if the last defrost cycle took 12 minutes.
 All units in the heating mode will simultaneously go into the defrost cycle in a system with multiple units. The units that are
not in operation may or may not go into the defrost cycle, depending on the cumulative operation time of their compressors.
Condition 1 Condition 2 Condition 3
Outside temperature
(TH7)
-5ºC [23ºF] or above -5ºC [23ºF] or below
Cumulative compressor
operation time
50 minutes or more
90 minutes or more if the defrost prohibit timer is set to 90.
250 minutes or more
Evaporating tempera-
ture (Te)
The evaporating temperature
has stayed below the tempera-
ture in the table below (Note1)
for 3 minutes
(Te ≤ 1.1 × TH7 - 7.5) continued
for 3 minutes or [{1.5 + 0.02 x
(20+TH7)} > 63LS] continued
for 3 minutes
The evaporating temperature
has stayed below the tempera-
ture in the table below (Note1)
for 3 minutes
(E)M200 - 300 (E)M350 - 500
SW4 (915) OFF -13 ºC -11 ºC
SW4 (915) ON -8 ºC -8 ºC
0000004980.BOOK 15 ページ ２０１９年５月９日 木曜日 午後６時１８分