Mitsubishi Electric City Multi CMH-WM250V-A, Service Handbook

Page: 351 / 436

[8-13 Parts Replacement Instructions ]
96
- chapter 8 BS_08_E
8 Troub
le
sho
oting Bas
ed on Ob
ser
ved
Sy
mp
toms
8-13-6 Maintenance Procedure for the Drain Pan
1. S-module
[Drain pan removal procedure]
(1) Remove the front panel from the unit by unscrewing the eight screws. (See Figure 1.)
(2) Cut the cable tie, unscrew the screw, and pull out the drain pan cover toward the right. (See Figure 3.)
(3) Remove the two rod holders holding the check joints in place, using a wrench. (See Figure 4.)
(4) Remove the drain pan by unscrewing the two screws. (See Figure 5.)
(5) Clean the drain pan and the drain pan cover. (See Figure 6.)
Remove dust and dirt from the drain groove.
Drain pan cover
Drain pan
Cable tie
Screw
Screw
Screw
Pull out toward the right.
Check joint
Rod holders
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5 Figure 6
Front panel
Move the drain pan down by the
amount that the drain pan and the
fin guard are overlapped.
Pull the drain pan forward
and down.
0000004986.BOOK 96 ページ ２０１９年５月９日 木曜日 午後６時２２分