![background image](http://html1.mh-extra.com/html/mircom/flex-net-bbx-1024ds/flex-net-bbx-1024ds_application-manual_1805815202.webp)
202
Using the Configurator
You must also specify whether the four or five lines are conventional phones or voice lines to
serve addressable phone modules. After the audio controller is added you can still edit these
attributes, or change just some of the lines between voice and conventional.
19.51.2 Adding a fire phone module
Add a fire phone module
1. Select the loop that you want to add a device to.
2. Click
Insert
in the menu bar, then click
Add Device
.
The
Add Device
window appears.
Figure 162 Add fire phone module
3. Select
Firephone Module
in the
Device
pulldown menu.
4. Click
the
Add
button.
19.51.3 Adding master telephones (QMT-5302N(V))
You can add a maximum of one master telephone to each RAXN-LCD annunciator or to the
base panel's main display. The master telephone uses one frame.
Add a master telephone
1. Select the annunciator or display adder that you want to add the telephone to.
2. Click
Insert
in the menu bar, then click
Add Display Adder
.
3. Select
Master Telephone
in the
Select Adder Type
menu.
4. Select the header (connector) in the
Select Header
menu.
5. Click
Add
.
6. Click
Close
.
19.51.4 Adding telephone/page selectors (QAZT-5302DS)
You can add any number of telephone/page selector adders to each RAXN-LCD annunciator
or to the base panel's main display, up to the maximum frame count for an annunciator. An
annunciator has 14 frames, and a telephone/page selector uses 2 frames.