184
Using the Configurator
19.35 Version Control
The Configurator prevents accidental editing of jobs in order to keep the job in its database
identical to the job on the Fire Alarm Control Panel.
19.35.1 Editing a job
When you open a job, whether by getting it from the panel or opening it from the database, it is
locked by default, and you must unlock it in order to edit it.
Edit a job
•
Click
Job
>
Edit Job
.
If the job has been sent to a panel, a message appears warning you that you should
create a new version first. See section 19.35.2 on page 184.
If you try to edit a locked job that has not been sent to a panel, a message appears asking if
you want to make it editable.
Figure 144 This job is protected against unintentional edits
•
Click
Yes
to unlock the job.
19.35.2 Creating a new version
If you try to edit a job that has been sent to a panel, a message appears saying that you must
create a new version.
Figure 145 This job version has already been built or downloaded to the panel
Note:
Jobs that have more than one node cannot be unlocked. You must create a new
version.
i
