22
Working with the Fire Alarm Control Panel and the Configurator
3. Click
Advanced
.
The
Advanced Panel Information
window appears.
Figure 13 Advanced Panel Information
2.8.2
Getting Configuration Information from the Fire Alarm Control Panel
You can get configuration information from the FACP itself, including the number of the ESD
and technician that configured the FACP.
Get configuration information from the FACP
1. On the main display of any node or on an annunciator for any node in the system, press
the MENU button.
2. Use the arrow buttons to scroll to
Config Info
, and then press ENTER.
The display shows the
ESDNo
(ESD number) and
TechNo
(technician number).
3. Press the down arrow button to see the Build Time (the date and time when the firmware
on the CPU was built).
4. Press the down arrow button to see the IP information for this node (the IP address, the
subnet mask, and the default gateway).
2.9
Getting Information about the CodeMeter Key
Get information about the CodeMeter Key
1. Insert the CodeMeter key into the computer.
2. In the Configurator, click
Panel
, and then click
Security Key Info
.
Config
The version of the Configurator that sent the job to the FACP.
Last changed
The date and time the FACP was last changed.
Panel Time
The date and time on the FACP.
Node
The number assigned to each node.
CPU/Address
The number for each CPU on the node.
Type
The type of CPU, for example a Main CPU, LCD Annuciator, Loop
Controller, or Audio Controller.
Version
The version of the firmware on the CPU.
Language
The language that the display uses for messages and menus.
Status
The status should be
Online
.
Config Version
GUID
A number that uniquely identifies the active job on the FACP.
