![background image](http://html1.mh-extra.com/html/mircom/flex-net-bbx-1024ds/flex-net-bbx-1024ds_application-manual_1805815151.webp)
Using the Configurator
151
System Messages
There are three 20 character text fields for the System Normal Message, and three 20
character text fields for the After Hours Message.
Locale
Low Power Lamptest
Select this check box to turn the LEDs on in groups rather
than all at the same time when you perform a lamp test.
Ring Telephone Buzzer
Select this check box to make the buzzer on this CPU ring
for incoming calls.
Ring buzzer on this CPU
Select this check box to allow you to configure (enable/
disable) the buzzer on Network masters and Rem.
Annunciators.
Print Colour
Select the colour to print log items in. Make sure that the
printer can print in colour.
•
Black
•
Red for alarms only
•
Multi colour (a different colour for alarm, supervisory,
monitor, and trouble events)
The Configurator cannot verify that the printer can support
the selected option.
Language
Select the language for this annunciator. The system uses
this language for any messages. The Main Display's
language is the default language for other annunciators
that are added to the job. You can have a mix of English
and French annunciators.
For
Eng/Arabic
and
Eng/Hebrew
, the language before
the slash is the language for the messages, and the
language after the slash is the language for the tags,
which are set in the list view for the device.
The main display does not support either Arabic or
Hebrew. If you want the system to show only Arabic or
Hebrew, either delete the main display, or physically hide
it from view, and use a remote annunciator (with Arabic or
Hebrew tags) in it place.
Time Format
Select the time and date format. The system uses this
format for all time reporting for this annunciator.
Use alternate tags
Select this check box to have the display use the alternate
(secondary) tags. You can use this feature to show tags in
a different language on designated displays. Alternate
tags can be entered in the list view for the device. The
tags can be in a different language from the primary tags,
but must use characters from the same code page.