35
4.0
AP Reports
AP (advanced protocol) reports are a new type of report that you can access from the main
menu of the FleX-Net™ display. You can print reports or display them on Tera Term. The
reports show only addresses that are configured.
Refer to LT-893 FleX-Net™ User Guide on
www.mircom.com
for instructions on how to see
the reports.
4.1
AP Device Type
This report prints the type and OEM value (manufacturer ID) that the panel retrieves from the
device. Use this report to make sure that the configured device description matches the actual
data that is retrieved from the device. Replace the device if it is not the correct type.
In the report, the configured device description is indicated as a text string, for example
Unsupv Output Module
. The Type and OEM values are retrieved from the actual device and
appear as numbers following the device description. The complete lists of possible values for
Type and OEM are shown in tables 1 and 2 below.
The device description should match the Type if the job is configured correctly.
Figure 31 AP Device Type report
Table 1 OEM Values
Name
Value
Mircom
3
Secutron
11
System Sensor
51
Table 2 Type Values
Name
Value
Ion
10
Heat Photo
33
Photo
23
Heat 135
54
Heat ROR
56
Heat 190
55