Using the Configurator
153
•
1
means the operator must enter the code specified for Level 1, in the
Passcodes
section.
•
2
means the operator must enter the code specified for Level 2, in the
Passcodes
section.
•
3
means the operator must enter the code specified for Level 3, in the
Passcodes
section.
The permissions given to each passcode apply to the levels under it. For example, an operator
who has the Level 3 passcode has access to the actions assigned to Levels 2 and 1.
19.9
Remote CPU
This section appears on remote annunciators only.
Figure 114 Remote CPU
19.10 Display Adder
Add a display adder
1. Select the annunciator or display adder that you want to add a display adder to.
2. Click
Insert
in the menu bar, then click
Add Display Adder
.
The
Add Display Adder
window appears.
Figure 115 Add Display Adder
3. Select the type of display adder that you want to add from the
Select Adder Type
pulldown menu.
4. Select the header (connector) in the
Select Header
pulldown menu.
Tag
Type a tag for the annunciator. The tag appears in the Job
Tree.
CPU Address
Select the remote CPU number for the remote
annunciator.