45
7.0
Walk Test
The walk test allows an operator to test the system or part of the system. While the system is
in walk test mode, devices can be tested without causing a real alarm situation.
Refer to LT-893 FleX-Net™ User Guide on
www.mircom.com
for instructions on how to
perform the walk test.
7.1
Configuring Walk Test Areas
Walk test areas are areas containing devices to be tested. Walk test areas let you test devices
in one area while leaving the other areas active. You create walk test areas in the
Configurator. In order to use the assisted walk test, the system must have walk test areas
configured.
Create a walk test area
1. In the Configurator, select Walk Test Areas in the Job Tree.
2. Right-click in the
Details
pane and select
Add WalkTest Area
.
Figure 39 Add WalkTest Area
3. Enter a name for the walk test area, for instance
1st Floor
, and then click
Add
.
The walk test area appears in the
Details
pane.
Figure 40 New walk test area
