Using the Configurator
217
19.56.3 Insert Menu
The
Insert
menu contains the following commands.
Some commands may be disabled (greyed) depending on what items are selected on the user
interface.
Some items may be suppressed depending on the product.
Version
History
Display the Version History (Date, Author, Comments) for
the current job.
Compare Job
Versions
Compare two versions of the same job, or two similar jobs
of different lineage.
Convert Job
For future use.
Validate Job
This action performs all of the steps normally performed
when preparing to send a job to the panel.
Edit Job
Toggle the lock on a job that is protected against
unintentional edits or has been down loaded to a panel.
Table 36 Insert Menu
Name
Description
Add Network
Nodes
Nodes Add a network node to the job.
Add Loop
Controllers
Add an Addressable or Conventional Loop Controller to the selected
network node.
Add
Annunciators
Add an LCD or LED Annunciator to the selected network node.
Add Display
Adder
Add a Display Adder to an Annunciator or Base Panel.
Add UDACT
Add UDACT capability to the selected network node.
Add Audio
Controller
Add an Audio Controller to the selected network node. A maximum of one
Audio Controller is allowed per node.
Context Dependent
Add Device
If the selected tree item is a device loop, add a device or circuit.
Add Message
Add a Message if the selected tree item is a remote annunciator that can
accept Custom Messages.
Add
Correlations
Launch a dialog that allows correlations to be added to the selected
devices or display items.
Table 35 Job Menu (Continued)
Name
Short cut
Description
