20
Working with the Fire Alarm Control Panel and the Configurator
2.6.1
Changing the Active Job using the Fire Alarm Control Panel
Change the active job using the Fire Alarm Control Panel
On the main display of any node (transponder unit) or on an annunciator for any node in the
system:
1. Press the MENU button, and then press the arrow buttons to scroll down to
Choose
Config
.
2. Press
ENTER.
3. If the system asks for your passcode, enter it, and then press ENTER.
4. Press the arrow buttons to scroll through the available configurations, and then press the
ENTER button to choose the configuration you want.
5. Press ENTER to confirm.
The system changes the active job.
2.6.2
Changing the Active Job using the Configurator
You can change the active job using the Configurator.
Change the active job using the Configurator
1. In the Configurator, click
Panel
>
Manage Jobs
.
The
Manage Jobs Configuration
window appears.
2. Right-click the job you want to make active, and then click
Activate Job
.
3. Click
Yes
to confirm.
The system changes the active job.
4. Click
OK
to close the
Manage Jobs Configuration
window.
2.7
Deleting a Job
The FACP can hold three jobs in its memory. If there are already three jobs on the FACP and
you want to send a new job, you must delete one of the old jobs.
Note:
This procedure changes the configuration for all the nodes that are currently
connected to the system.
Note:
This procedure changes the configuration for all the nodes that are currently
connected to the system.
Note:
You cannot delete the active job. You must make another job active first.
i
i
i