Mindray BeneHeart D3, Operator'S Manual

Page: 156 / 186

A-10
Battery
Battery type
14.8V/3Ah, smart lithium ion battery, rechargeable and free of maintenance, one battery
can be configured
Charge time
Less than 2 hours to 80% and less than 3 hours to 100% with equipment power off;
Less than 3.5 hours to 80% and less than 4.5 hours to 100% with equipment power on.
New fully charged battery Testing condition
Monitoring ≥2.5 h
Without recording, typical ECG
monitoring, LCD brightness set to 1
Defibrillation ≥100 discharges
360J discharges at intervals of one minute,
without recording
Run time
pacing ≥2 h
50 Ω load impedance,
pacing rate: 80bpm,
pacing output 60mA, without recording
Battery fuel gauge 5 LEDs indicating the current battery charge level
Shutdown delay
At least 20 minutes of monitoring and six 360J discharges (after the low battery alarm
occurs)
Note: The specifications above base on a new battery, and at 20ºC.
A.6 Recorder Specifications
Method High-resolution thermal dot array
Number of waveforms Max. 3
Paper speed 25 mm/s, 50 mm/s
Paper width 50 mm
Grid lines The operator can choose to print grid lines or not
Auto record
Charge events, shock events, marked events, auto test report, parameter alarms, ARR
alarms, if configured on
A.7 Alarm Specifications
Alarm Levels High, medium, low level alarms, complying with IEC60601-1-8
Alarm Categories Physiological alarms, technical alarms; Latched alarms and unlatched alarms.
Alarm lamp Independent alarm LED
Parameter alarm setting
Alarm properties of all available parameters can be set simultaneously in the Para. Alarm
menu
Auto alarm limits
Parameter alarm limits can be automatically adjusted according to currently measured
vital signs