Mindray BeneHeart D3, Operator'S Manual

Page: 163 / 186

C-1
C
BeneHeart Defibrillator Shift Checklist
Inspect the defibrillator/monitor at the change of every shift. Place a “
√
” in the “Pass/Fail” box as you check the item , or
place a “-” if not applicable. Describe the problem if there is any abnormity.
Equipment Name: Serial Number: Department:
Item Requirements Pass/Fail Description of Abnormity
Equipment appearance Clean, no foreign substance, no crack
Batteries At least one battery installed, battery
indicator on, and more than 60% of
battery capacity left
AC power supply AC power supply connected, green AC
indicator on
Recorder paper Present and sufficient
Cables/connectors Cables not frayed, connectors and pins not
broken or loose
ECG cable set and electrodes
(skip if not in use)
Present. Cables not frayed, connectors and
pins not broken or loose
External paddles
(skip if not in use)
Cables not frayed, connectors and pins not
broken or loose ,Properly placed in paddle
tray and easily removed
Pads cable and pads
(skip if not in use)
Present, pads cable not damaged, pads
not expired. Cables not frayed, connectors
and pins not broken or loose
Pads cable shock test*
(skip if not in use)
Turn the mode select knob to “Manual
Defib”, connect the pads cable and test
load, charge to 200J, and press the “Shock”
button. Then the system prompts that
shock delivered normally. Disconnect the
test load after the test is finished.
Paddles shock test**
(skip if not in use)
Turn the mode select knob to “Manual
Defib”, connect the paddle cable and place
the paddles onto the paddle trays, charge
to 10J, and press the “Shock” button. Then
the system prompts that shock delivered
normally.
Service indicator Off
Checked by: Date: