Mindray BeneHeart D3, Operator'S Manual

Page: 159 / 186

B-1
B
EMC
The equipment meets the requirements of IEC 60601-1-2.
NOTE
z
Use of accessories, transducers, and cables other than those specified may result in increased emission
and/or decreased electromagnetic immunity of the defibrillator/monitor.
z
The equipment or its components should not be used adjacent to or stacked with other devices. If adjacent
or stacked use is necessary, the equipment should be observed to verify normal operation in the
configuration in which it will be used.
z
The equipment needs special precautions regarding EMC and needs to be installed and put into service
according to the EMC information provided below.
z
Other devices may affect this monitor even though they meet the requirements of CISPR.
z
When the inputted signal is below the minimum amplitude provided in technical specifications, erroneous
measurements could result.
z
Portable and mobile RF communications equipment may affect this equipment.
Guidance and Declaration - Electromagnetic Emissions
The equipment is suitable for use in the electromagnetic environment specified below. The customer or the user of the
equipment should assure that it is used in such an environment.
Emission test Compliance Electromagnetic environment - guidance
RF emissions
CISPR 11
Group 1 The equipment uses RF energy only for its internal function.
Therefore, its RF emissions are very low and are not likely to
cause any interference in nearby electronic equipment.
RF emissions
CISPR 11
Class B Meet the requirements of Class B
Harmonic emissions
IEC 60601-1-2
EN 61000-3-2
Class A
Voltage fluctuations/flicker emissions
IEC 60601-1-2
EN 61000-3-3
Complies
The equipment is suitable for use in all establishments,
including domestic establishments and those directly
connected to the public low-voltage power supply network
that supplies buildings used for domestic purposes.