Mindray BeneHeart D3, Operator'S Manual

Page: 101 / 186

14-1
14
Marking Events
During patient monitoring or therapy, some events may exert effects on the patient and as a result change related
waveforms and parameter values. To help analysing the waveforms or numerics at that time, you can mark these events.
Before marking an event, you can define events A to H, for example, define event D as injecting Atropine. You can only
define an event through configuration management. Event A is always [ Generic ] and cannot be changed.
To mark an event,
1. In Monitor mode, Manual Defib mode, or Pacer mode, press the [ Event ] button on the front panel to access the
[ Mark Event ] menu as shown below.
2. Select an event you want to mark from [ A ] to [ H ], or select [ Exit ] to return to the main screen.
In AED mode, pressing the [ Event ] button directly marks Event A “Generic”.
When you mark an event, the event name and the time when the event is triggered will be displayed at the prompt
information area. This information disappears automatically after a period of 5 seconds.