Mindray BeneHeart D3, Operator'S Manual

Page: 130 / 186

22-2
22.2 Maintenance and Testing Schedule
The following tests, except recorder check and user test, shall be carried out by the service personnel only. Contact your
service personnel if any maintenance is required. Make sure to clean and disinfect the equipment before any test and
maintenance.
Test item Weekly After use 12 months 24 months
Cleaning equipment and accessories
×
Routine Test
×
Energy delivery test
× User test
Controls test
×
Recorder check
×
ECG cable test
×
Charge/discharge
Energy disarming
Manual defibrillation
tests
Synchronous defibrillation
×
Pacing test
×
Accuracy test
NIBP tests
Leakage test
×
NIBP overpressure protection test
×
Electrical safety tests as per IEC60601-1
×
22.3 Carrying Out Maintenance and Testing
22.3.1 Power-on Tests
The equipment performs self test each time you turn it on or restart the equipment. If a failure is detect the red status
indicator will flash and a message is presented in the technological alarm area.
Power-on self tests will check the following items:
„
Power module,
„
Therapy module,
„
Main control system, and
„
Monitoring function.
You need to power on the equipment every day, or when the equipment is first installed, or following any maintenance
or the replacement of any main unit parts to verify that the equipment can be turned on properly.
1. Place the external paddles on paddle tray, insert the battery in the battery compartment, and then connect the
equipment with AC mains. In this case, both the AC indicator and battery indicator shall light.
2. Turn the Mode Select knob to Monitor. Check that the equipment passes the self test and is turned on properly.