Mindray BeneHeart D3, Operator'S Manual

Page: 134 / 186

22-6
22.3.4.5 Test Summaries
The results of User Test are automatically saved as summaries. You can select the [ History ] button from the User Test
Main menu to review the test summaries.
The equipment can store up to 300 historical test summaries which are listed in the sequence of time, with the latest on
the top. You can use the knob to select a test result and press the knob to check the detailed test report.
22.3.4.6 User Test Reminder
We recommend that Routine Test and Energy Delivery Test are executed once per week and Controls Test once every 12
months.
Each time when the equipment is turned on, the time to last Routine Test, Energy Delivery Test and Controls Test is
checked automatically. The equipment can be configured to give a “User Test Due” message to remind you that the
equipment is due for User Test.
The [ User Test Prompt ] is switched off by default. You can switch it on by selecting [ User Test Setup ] [
→
User Test
Prompt ] [
→
On ] through the configuration mode.
NOTE
z
In case that automated Routine Test is not performed, we recommend you to run Routine Test once per day
through User Test.
22.3.5 Recorder Inspection
1. Turn the Mode Select knob to Monitor.
2. Start recording to verify that the recorder works properly and the printout is legible and correct.
3. Simulate errors, such as removing the paper roll and losing the latch, correct information shall be shown in the
prompt area. The recorder shall work properly after the faults are corrected.