Mindray BeneHeart D3, Operator'S Manual

Page: 43 / 186

5-3
5.3.2 Audible Alarms
The equipment uses different alarm tone patterns to match the alarm level:
„
High level alarms double beeps.
„
Medium level alarms triple beeps.
„
Low level alarms single beep.
5.3.3 Alarm Message
When an alarm occurs, the alarm message will appear in the technical or physiological alarm area. For physiological
alarms, the asterisk symbols (*) before the alarm message match the alarm level as follows:
„
High level alarms ***
„
Medium level alarms **
„
Low level alarms *
Additionally, the alarm message has different background color which matches the alarm level.
For physiological alarms
„
High level alarms red
„
Medium level alarms yellow
„
Low level alarms yellow
For technical alarms
„
High level alarms: red
„
Medium level alarms: yellow
„
Low level alarms: blue
5.3.4 Flashing Numeric
If an alarm triggered by an alarm limit violation occurs, the numeric of the measurement in alarm will flash every second,
and corresponding alarm limit will also flash at the same frequency indicating the alarm limit is violated.
5.3.5 Alarm Status Symbols
Apart from the aforementioned alarm indicators, the equipment still uses the following symbols telling the alarm status:
„
indicates all alarms are paused.
„
indicates all system alarms are turned off.
„
indicates alarm sounds are paused.
„
indicates alarm sounds are turned off.