Midas PRO6, Owner'S Manual

Page: 96 / 614

70
Chapter 8: Patching
PRO6 Live Audio System
Owner’s Manual
2
Select the I/O device from the drop-down list at the
top of the configuration window.
3
Select the card/channel you want to
configure/change, from the
drop-down list at the upper-right
corner of the configuration window.
For example, the “Analogue In
Card”.
4
In a channel, configure the parameters. For example, in
channel “In1”, adjust the gain and switch the +48V phantom
voltage on (shown right).
5
Repeat step 4 for the other channels in the card.
6
Repeat step 3 to step 5 for the other cards.
7
If you want, you can configure other I/O devices by
repeating step 2 to step 6. Otherwise, click CLOSE (bottom
of configuration window) to save the configuration changes
and close the window.