manualshive.com logo in svg

Midas PRO6, Owner'S Manual

Share
Download
Midas PRO6 Owner'S Manual Download Page 385

Troubleshooting automation

359

PRO6 Live Audio System
Owner’s Manual

Troubleshooting automation

This section explains the error messages that you may see when using PRO6 
automation.

Error messages

Error messages, which can appear when you are accessing the Files or Automation 
screens, provide useful information on the condition that triggered them.  Due to the 
way the filing and automation systems interact with the internal processing system of 
the PRO6, not all error messages are indicative of a problem; some may appear due to 
the current state of the system and just require a retry of the operation.

Error messages comprise two components — a first line of text containing the error 
condition, followed on the next line by a description of the error (prefixed by the text 
“response:”).  The error condition text indicates the operation that may have triggered 
the error message, while the error description text explains the reason for failure and, 
in some cases, also provides information that may be useful to service engineers.  The 
following diagram shows a typical error message.

>> To proceed after an error message appears

1

Heed the error message.

2

Click OK.

3

Take the appropriate action for that particular error.  Refer to Table 19 “List of 
error condition messages” on page 360 and Table 20 “List of error description 
messages” on page 361.

Automation error messages

An automation error message may be generated by any of the following:

• An attempt to perform a copy and paste is ignored.
• Attempting to assign notes to a scene.  The text “There was an error setting the 

scene note” will be displayed.

• An attempt to assign MIDI data to a scene is ignored.
• An attempt to set the navigation mode, that is, switching rehearsal mode on or off, 

is ignored.

• An attempt to skip/unskip a scene or point scene; see “Rehearsals” on page 190.
• An attempt to assign the default store option is ignored.
• An attempt to assign the rehearsal mode state for all scenes is ignored.  (This 

functionality is not available to the user.)

• An attempt to set the MIDI navigation mode is ignored.  (This functionality is not 

available to the user.)

• An attempt to modify the scene list mode is ignored.

Error condition (see “Error condition 

messages” on page 360)

Error description (see “Error 

description messages” on page 361)

Summary of Contents for PRO6







































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands