manualshive.com logo in svg

Midas PRO6, Owner'S Manual

Share
Download
Midas PRO6 Owner'S Manual Download Page 399

373

PRO6 Live Audio System
Owner’s Manual

Appendix I: Documentation

This chapter gives details of all the user and supplementary documentation for the 
PRO6 Live Audio System.

All of the documents mentioned in this chapter are currently supplied with the PRO6 
Live Audio System.  They are supplied electronically in portable document format (PDF) 
on appropriate media.

System user documentation

The following table shows the full suite of Midas PRO6 Live Audio System 
documentation.

Supplementary documentation

This section lists all the supplementary documentation available for the PRO6 Live Audio 
System, which comprises manuals from the standard Midas and Klark Teknik range of 
products.  These documents are included as reference material to accompany the PRO6 
user documentation, particularly for the GEQs and internal effects.

• Klark Teknik DN370 Graphic Equaliser Operator Manual, part number 

DOC02-DN370C.

• Klark Teknik DN780 Digital Reverberator/Processor Operator Manual.

• Klark Teknik Square ONE Dynamics Processor Operator Manual, part number 

DOC02-SQ1DYNAMIC.

• Klark Teknik HELIX RAPIDE DN9331 Graphic Controller Operator Manual, part 

number DOC02-DN9331.

Document Name

Description

Part Number

PRO6 Live Audio 
System Owner’s 
Manual

Full user instructions for the PRO6 Live 
Audio System, including the PRO6 
Control Centre.

DOC02-DL3

PRO6 Control Centre 
Quick Reference 
Guide

Contains quick set-up and operation 
instructions for the PRO6 Live Audio 
System and PRO6 Control Centre.

DOC04-DL3

DL351 Modular I/O 
Operator Manual

Full user instructions for the 
DL351 Modular I/O.

DOC02-DL351

DL371 Audio System 
Engine Operator 
Manual

Full user instructions for the DL371 Audio 
System Engine.

DOC02-DL371

GNU General Public 
License (GPL) Booklet

Licensing information for Midas Digital 
Equipment.

DOC04-GPL

Summary of Contents for PRO6







































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands