manualshive.com logo in svg

Midas PRO6, Owner'S Manual

Share
Download
Midas PRO6 Owner'S Manual Download Page 251

225

PRO6 Live Audio System
Owner’s Manual

Chapter 27: Changing The User 
Settings

This chapter shows you how to change the user settings of the PRO6 to suit your own 
preferences and the current working environment.

The user settings are changed via the GUI 
menu, mainly from the Preferences screen 
(shown right) and the ‘Sheet’ screens.

>> To open the Preferences screen

At a GUI screen, choose 
home

Preferences

General.

Setting the meter preferences

The Metering Preferences section of the Preferences 
screen provides global parameter adjustment of all the 
meters on the control centre.

• Peak/Hold Time control knob, sets the time (in seconds) 

the peak LED stays on for, in the range 0 (no peak hold) to 
infinity (peak always on).  This only affects the meters on 
the GUI.  Click the enable tick box below to switch on this.

• Meter Attack control knob, adjusts the time it takes the 

meters to rise, in the range 0 (no delay) to 10 
milliseconds.  Select the pre option to switch the output 
channel meters to pre-fader.

• Meter Delay control knob, adjusts the meter delay time, in the range 0 to 

0.5 seconds.  For example, if the control centre is FOH, this function allows you to 
synchronise the meters with what you are hearing.  This is because the sound from 
the performers on the stage will take a certain amount of time to reach you, whereas 
the meters pick up that sound at source.  Click the enable tick box below to switch 
this function.  You can adjust the meter delay by using the spin buttons underneath, 
which display the delay time in milliseconds (ms) and distance in metres (m).

• Meter Decay control knob, adjusts the time it takes the meters to fall, in the range 

10 to 25 milliseconds.

Summary of Contents for PRO6







































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands