Midas PRO6, Owner'S Manual

Page: 227 / 614

Programming events
201
PRO6 Live Audio System
Owner’s Manual
Figure 23: Edit Event window
>> To open/close the Edit Event window
For details of how to open the Edit Event window, see “To edit an event” on page 96.
To close the window, click “X” at the upper-right corner.
Programming events
Each type of event is programmed in a similar way, regardless of whether it is an
incoming/outgoing MIDI or GPIO event, or an internal event. However, the options in
the Edit Event window may vary depending on the chosen event.
>> To program an event
1
Open the Edit Event window (see “To edit an event” on page 96).
2
In the Event Name section, type in the event name. If you want to skip this
event during a rehearsal, select the Disable Event option.
3
To select whether the event occurs on the PRO6 or an external device, click
Incoming or Outgoing, respectively. (This is not applicable to internal events.)
4
Select the desired parameters in the When..., Then do this... and Event
Parameters sections. To help you, refer to Table 11, Table 12 and Table 13.
5
If you want to incorporate a time delay between the event being triggered and
the event itself, select a time in the Time Offset section (click the up/down spin
buttons).
6
Click CLOSE.
Table 11: Outgoing event options
9 Text field, for displaying the user-configured event name. You can edit the
event name in this text field, which will be displayed in the Name column of
the scene cue list (see “Scene cue list” on page 183).
10 Enable Midi Byte 1 and 2 tick boxes, for selecting the parameters in the
drop-down list to the left of each tick box. These give you more-specific
parameters to choose from.
When ... Then do this... Event Parameters (from top list downwards)
Scene Exit,
Scene Recall,
Scene Entry
And Recall,
Scene Entry
And Exit,
Scene Entry,
Exit And
Recall Midi TX IO ID1 to
IO ID 17,
FOH MIDI
PORT Channel 1
to
Channel
16 Program
Change,
Control
Change,
Pressure,
Aftertouch,
Note On,
Note Off Program 1
to
Program
128
GPIO TX IO ID1 to
IO ID 17,
FOH MIDI
PORT Static
Low,
Static
High Closure 1 to
Closure 8 N/A
Last N/A N/A N/A N/A
Item Description