manualshive.com logo in svg

Midas PRO6, Owner'S Manual

Share
Download
Midas PRO6 Owner'S Manual Download Page 391

Troubleshooting automation

365

PRO6 Live Audio System
Owner’s Manual

not in storing 
state

Automation

The Automation System was 
momentarily unable to store 
a scene.

Try again.  If repeated 
attempts fail, contact Midas 
Technical Support.

null pointer

File and 
Automation

Critical internal error.

This is an indication of a 
serious error.  Contact Midas 
Technical Support.

p

persistent storage 
error

File and 
Automation

The GUI or one of its 
subsystems is out of date and 
cannot interpret the new 
failure modes.

Update the GUI and its 
subsystems.
If the problem persists, 
contact Midas Technical 
Support.

point scene index 
continuity error

File and 
Automation

The show file being modified 
is damaged.

This is an indication of a 
serious error.  Contact Midas 
Technical Support.

point scene index 
integrity error

File and 
Automation

The show file being modified 
is damaged.

This is an indication of a 
serious error.  Contact Midas 
Technical Support.

point scene insert 
error

File and 
Automation

Failed to insert a point scene.

This is highly unlikely to occur 
in practice, but is an 
indication of a serious error.  
Contact Midas Technical 
Support.

portable scene 
format conversion 
error

Automation

The attempt to load a show, 
which was last saved by an 
MC built with a different 
enum version, failed during 
the scene conversion stage of 
the loading process.

Try again.  If repeated 
attempts fail, contact Midas 
Technical Support.

r

required device 
has files that are 
in use

File and 
Automation

Another task is currently 
accessing file(s) on the 
device, that is, the internal 
compact flash of the PRO6 or 
USB memory stick (if 
connected).

Try again.

required device is 
locked

File and 
Automation

Another task is currently 
accessing the device, that is, 
the internal compact flash of 
the PRO6 or USB memory 
stick (if connected).

Try again.

s

scene capacity 
violation

File and 
Automation

The scene cannot be stored 
to the show file, as it already 
contains the maximum 
number of scenes allowed.

If necessary, delete one or 
more of the other scenes.  
The maximum capacity for a 
show file is 500 scenes for a 
512MB master controller 
(MC) and 1000 scenes for a 
1GB MC.

scene UID error

File and 
Automation

The file being modified is 
damaged.

This is an indication of a 
serious error.  Contact Midas 
Technical Support.

Error Message

System(s)

Problem

Solution

Summary of Contents for PRO6







































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands