manualshive.com logo in svg

Midas PRO6, Owner'S Manual

Share
Download
Midas PRO6 Owner'S Manual Download Page 124

98

Chapter 9: Basic Operation

PRO6 Live Audio System

Owner’s Manual

Configuring the inputs and outputs

Similarly to the VCA/POP groups, you can change the name and colour of each of the 
inputs and outputs.  This is done via the GUI at their respective sheet screens.  For 
configuration details, see “Configuring VCA/POP groups” on page 85.

>> To open the Input/Output Sheet screen

Do one of the following:

• At the GUI, choose home

Input Channels

Input Sheet to open the 

Input Sheet screen, or choose home

Mix & Outputs

Output Sheet to open 

the Output Sheet screen.

• In the primary navigation zone, press the inputs/outputs screen access button to 

open the Input Sheet screen.  To open the Output Sheet screen, press it again.

Using copy and paste

The copy and paste buttons (upper-right corner of GUI) allow you to copy the 
parameters of one/all of a single channel’s processing area(s) — such as the EQ, 
compressor, gate etc. — and paste them to one/all of the other channels of a similar 
type.

Right-clicking the copy or paste button will open their respective menu, each of which 
contains full copy/paste options.

>> To copy a processing area to a channel/all channels

1

If necessary, navigate the channel’s processing area to the channel strip (see 
“Navigating a processing area or mix bus to a channel strip” on page 53).

2

Click copy.

3

Do one of the following:

• To copy the processing area to another channel, select the channel and then 

click paste.  (As the copied parameters are still stored, you can paste to as 
many channels as you want.)

• To copy the processing area to all other channels, right-click paste to open its 

menu and then choose Paste To All.

>> To copy all parameters to a channel/all channels

1

If necessary, select the channel from which you want to copy all of the processing 
areas.

2

Right-click copy to open its menu, and then choose Copy All.

3

Do one of the following:

• To copy the parameters to another channel, select the channel and then click 

paste.

• To copy the processing area to all other channels, right-click paste to open its 

menu and then choose Paste To All.

Summary of Contents for PRO6







































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands