Midas PRO6, Owner'S Manual

Page: 38 / 614

12
Chapter 2: PRO6 Live Audio System
PRO6 Live Audio System
Owner’s Manual
• Direct input.
• Routing via level controls to 16 matrix buses.
Effects processing and GEQs
The PRO6 contains eight mono Klark Teknik (KT) GEQs and seven effects processors as
standard.
The seven effects processors can be freely chosen from:
• KT DN780 reverb.
• Delay.
• Flanger.
• Phaser.
• Pitch shifter.
• SQ1 dynamics.
• Stereo 3-band compressor.
The eight mono KT GEQs can be patched into any output. There are many patching
options for the effects processors:
• Assign to any insert send/return.
• Assign to any pool, in or out.
• Assign FX out to aux return.
• Assign FX in to aux send (post-fade).
• Assign FX out to bus direct in.
• Assign FX in to channel direct out.
A Klark Teknik DN9331 RapidE motorised fader GEQ controller can be used with the
PRO6. This unit provides rapid adjustments of the graphics with real hardware, and not
a mouse and screen. The graphic channel is selected either by the SOLO button (solo
tracking system (STS™)) on the PRO6 Control Centre or by buttons on the RapidE itself.
Audio physical connections
The total number of audio connections, that is, the XLR count, for a standard PRO6 Live
Audio System is 96. This includes dedicated and configurable XLR connections. The
dedicated XLR connections on the DL351 Modular I/O comprises 56-off mic/line inputs.
All of the configurable connections are on the PRO6 Control Centre, which can be freely
located at the FOH or on stage. Three banks of sockets (eight XLRs each) are available
for:
• 8-off 1/4” TRS analogue mic/line inputs (returns) and 8-off 1/4” TRS analogue
outputs (sends).
• 8-off AES/EBU XLRs providing eight digital inputs and eight digital outputs per
module.
• 8-off XLR analogue inputs.
• 8-off XLR analogue outputs.